Ford · Focus

2001 Ford Focus Recalls

Compact car · FWD · Regular

There are 7 safety recalls on file for the 2001 Ford Focus, filed between December 2000 and February 2005. Each one is repaired free by a franchised Ford dealer, no matter how old the car is or who owns it now.

A recall covers a range of build dates, so not every 2001 Focus is affected by every campaign below. To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.

2005 (1)

05V030000 Filed Feb 1, 2005 589,932 vehicles

Doors latch

Certain passenger vehicles with four or five doors and originally sold in or currently registered in connecticut, delaware, illinois, indiana, iowa, maine, maryland, massachusetts, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin, and the district of columbia, a build-up of corrosion AT the pawl pivot area of the rear door latch CAN cause a binding condition of the pawl that may affect proper engagement of the pawl into the catch. The occupant may experience difficulty opening or closing a rear door, and eventually the rear door may not latch properly.

Risk and remedy
Risk
If not latched properly, the door may open while the vehicle is in motion. If an occupant fell out of the vehicle, personal injuries could occur.
Remedy
Dealers will have a lower rocker seal added to the door and have the rear door latches evaluated free of charge. A latch that passes the evaluation will be lubricated to prevent future corrosion. A latch that does not pass the evaluation will be replaced. In addition, a sticker will be affixed to the rear doors advising the owners to use the recommended lubricant. The recall began on march 9, 2005. Owners may contact ford AT 1-800-392-3673.
Filed by
FORD MOTOR COMPANY (manufacturer number 05S27)

2003 (1)

03V482000 Filed Nov 19, 2003 671,000 vehicles

Fuel system, gasoline

On certain passenger vehicles, contamination of the filter in the fuel delivery module (fdm) CAN reduce, and eventually block, the flow of fuel to the engine.

Risk and remedy
Risk
This may cause engine hesitation, loss of power, surging, and other similar symptoms. Over time, the filter may become sufficiently blocked to cause the engine to stall, which could result in a crash.
Remedy
This action is deemed a safety improvement campaign and is not being conducted under the safety act. All owners will be notified of the problem, and dealers will replace the fdm with a new design AT no charge if the owner reports that the vehicle exhibits any of the identified symptoms. The free replacement will be available for a period of 10 years following the original purchase of the vehicle, with no mileage limit. Owner notification is expected to begin during november 2003. Owners should contact ford AT 1-800-392-3673.
Filed by
FORD MOTOR COMPANY (manufacturer number 03N01)

2002 (2)

02V289000 Filed Nov 6, 2002 446,569 vehicles

Linkages

Certain passenger vehicles have loose pinch bolts that secure the lower control arm to the steering knuckle have been reported.

Risk and remedy
Risk
Loose pinch bolts could exhibit noise, vibration and, in extreme cases if left uncorrected, separation of the joint or fracture of the ball joint stud, increasing the risk of a crash.
Remedy
Dealers will inspect the steering knuckle pinch bolt for tightness and correct as necessary. Owner notification began february 10, 2003. Owners who do not receive the free remedy within a reasonable time should contact ford AT 1-866-436-7332.
Filed by
FORD MOTOR COMPANY (manufacturer number 02S42)
02V288000 Filed Nov 6, 2002 291,854 vehicles

Cables

Certain passenger vehicles equipped with zetec engines, loose or broken attachments and misrouted battery cables could lead to cable insulation damage.

Risk and remedy
Risk
This, in turn, could cause the battery cables to short resulting in heat damage to the cables. Besides heat damage, the "check engine" light may illuminate, the vehicle may fail to start, or smoke, melting, or fire could also occur.
Remedy
Dealers will inspect the battery cables for the condition of the cable insulation and proper tightening of the terminal ends. As necessary, cables will be rerouted, retaining clips installed, and damaged battery cables replaced. Owner notification began february 10, 2003. Owners who do not receive the free remedy within a reasonable time should contact ford AT 1-866-436-7332.
Filed by
FORD MOTOR COMPANY (manufacturer number 02S41)

2001 (2)

01V258000 Filed Aug 8, 2001 1,083,000 vehicles

Windshield wiper/washer motor

Vehicle description: passenger cars, sport utility vehicles, and light and medium duty pickup trucks. A switch located in the plastic cover of the wiper motor gear case could malfunction and overheat, potentially resulting in loss of intermittent wiper function, loss of wiper park function, complete loss of wiper function, or ignition of the plastic cover material. Switch malfunction is most likely to occur when the intermittent setting of the wipers is being used, or when snow or ICE obstructs the blades from returning to the "parked" position AT the bottom of the windshield. These vehicles were built AT the following assembly plants: atlanta plant from 2/11/00 through 7/31/00; chicago plant from 2/14/00 through 8/4/00; kansas city plant from 2/26/00 to 9/4/00; kentucky truck plant from 2/18/00 to 8/31/00; michigan truck plant from 2/23/00 through 8/3/00; norfolk plant from 2/21/00 through 7/27/00; wayne stamping and assembly plant from 2/25/00 through 8/15/00; and wixom plant from 2/15/00 through 8/8/00.

Risk and remedy
Risk
Loss of visibility while driving increases the risk of a crash.
Remedy
Dealers will inspect the date code on the wiper motor. Motors built with the suspect time frame will have the wiper motor gear case cover replaced. Owner notification began august 20, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford AT 1-866-436-7332.
Filed by
FORD MOTOR COMPANY (manufacturer number 01S24)
01V108000 Filed Mar 28, 2001 8,500 vehicles

Recliner

PM certain sedans and wagons, the seat back recliner handle spring could have been damaged during an in-process test and the occupant may notice a chucking, or perceived looseness of the front seat back, or the seat back could unexpectedly recline.

Risk and remedy
Risk
If the seat back unexpectedly reclines while the car is being driven, it could result in loss of vehicle control.
Remedy
Dealers will replace the seat back recliner handle spring for the driver and front passenger seats. Owner notification began april 3, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford AT 1-800-392-3673.
Filed by
FORD MOTOR COMPANY (manufacturer number 01S13)

2000 (1)

00V418000 Filed Dec 14, 2000 95,000 vehicles

Recliner

Vehicle description: station wagons and 3-door vehicles. The subject vehicles have a folding 60/40 second seat that becomes a load floor in the folded position. When the 60% portion of the seat is folded down and a load is applied to the front edge of the load floor, the outboard hinge pivot could disengage from the hinge.

Risk and remedy
Risk
If the seat is then returned to the upright position without re-engaging the hinge pivot, the seat and seat belts may not provide the intended level of performance in the event of a crash.
Remedy
Dealers will install a revised seat back hinge pivot.
Filed by
FORD MOTOR COMPANY (manufacturer number 00S55)

Recall questions

How many recalls does the 2001 Ford Focus have?

NHTSA lists 7 recalls for the 2001 Ford Focus.

How do I know if my car's recall was fixed?

Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.