Ford · Fusion

2006 Ford Fusion Stability and traction control Problems

Midsize car · FWD · Regular

Owners of the 2006 Ford Fusion have reported 5 stability control problems to NHTSA, 1% of all complaints about this model year.

Where owners named a specific part, the most common were automatic (asc) (1).

The typical report came at around 100,000 miles, and complaints were filed between May 2008 and September 2017.

For comparison, the 2010 Fusion has the most stability control complaints of any year, with 155.

Electronic stability control and traction control systems and their warning lights.

1 recall for this model year involves the stability control. If your problem matches, a dealer repairs it free under the recall.
Complaints5
Typical mileage100k
Crashes / fires0 / 0
Injuries0

Parts named in these complaints

  • Automatic (Asc)1

Owners choose these labels when they file, so they are a guide rather than a diagnosis.

What owners say

Stability and traction control Filed Sep 2017 131,426 miles MD

While driving the car on the highway AT typical highway speeds (60mph-70mph) the wrench indicator light comes on in the dashboard and the car looses the ability to accelerate any faster than about 10 miles an hour. We pull over, turn the car off and start it back up again and it appears to run fine. This CAN happen randomly one day and then not happen again for a few weeks or even a month or two then it does it again. Based on my research comparing other drivers posting about the same problem I believe this problem is due to a defective throttle body or what is sometimes called the etb = electronic throttle body.

Owner complaint 11022904 filed with NHTSA
Stability and traction control Filed Aug 2017 77,000 miles TX

While driving my engine intermittently shuts off. The car will still be "on". In the sense that the AC and radio and other features are still working, but the car will not accelerate or move. I have to put it in park. And restart it. "check engine" and "check charging system" indicator lights pop up on the dash. I have done several things, change belts, changed alternators, changed cam shafts, and finally after that thousand dollars was spent the code I'm getting read from my mechanic is for the throttle body shut down.

Owner complaint 11014889 filed with NHTSA

Related recalls

19V904000 Filed Dec 18, 2019 600,166 vehicles

Control unit/module

Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.

Risk and remedy
Risk
If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.
Filed by
Ford Motor Company (manufacturer number 19S54)

Stability and traction control complaints across Fusion years

Questions about stability and traction control problems

How common are stability and traction control problems on the 2006 Ford Fusion?

5 owners have reported stability and traction control problems to NHTSA, 1% of all complaints for this model year.

Is there a recall for stability and traction control problems on the 2006 Ford Fusion?

Yes. 1 recall for this model year concerns the stability control: 19V904000.