Ford · Fusion

2010 Ford Fusion Stability and traction control Problems

Midsize car · AWD, FWD · Regular

Owners of the 2010 Ford Fusion have reported 155 stability control problems to NHTSA, 3% of all complaints about this model year.

The typical report came at around 87,000 miles, and complaints were filed between May 2011 and December 2023.

These stability control complaints include 4 crashes, 1 fire, and 4 injuries.

No other Fusion year has as many stability control complaints.

Electronic stability control and traction control systems and their warning lights.

1 recall for this model year involves the stability control. If your problem matches, a dealer repairs it free under the recall.
Complaints155
Typical mileage87k
Crashes / fires4 / 1
Injuries4

What owners say

Stability and traction control Filed Dec 2023 120,000 miles CA

The contact owns a 2010 Ford Fusion. The contact stated that while starting the vehicle, the power steering assist fault and Service Advancetrac messages were displayed, and the traction control warning light was illuminated. The vehicle was towed to an independent mechanic, who diagnosed and determined that the power steering needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 120,000.

Owner complaint 11557926 filed with NHTSA
Stability and traction control Filed Nov 2022 87,000 miles TX

The contact owns a 2010 Ford Fusion. The contact stated that while starting the vehicle, the power steering default warning light would illuminate. In order to turn off the warning light, the contact had to turn off and then restart the vehicle. The failure occurred intermittently however, the failure persisted with the power steering assist default warning light remaining illuminated, with the service advancetrac and traction control warning lights illuminated. The contact took the vehicle to the dealer who diagnosed that there was an internal failure in the power steering module.

Owner complaint 11495453 filed with NHTSA
Stability and traction control Filed Oct 2020 100,000 miles WI

On10/4/2020, traveling forward on a nearby county road AT approx 40 MPH, the ABS warning and advancetrac system failure warning lights came on. I applied pressure to the brakes and there was no power brakes. After becoming very excited and believing the vehicle would not stop, depressed the brake pedal several inches further than normal and felt resistance. With enough pressure I was able to bring the vehicle to a stop but not an easy task. If this had been a situation in which I needed to stop quickly, I do not believe this could have been managed. Contacted a family member and I followed them slowly to the local Ford dealer.

Owner complaint 11363037 filed with NHTSA

Related recalls

19V904000 Filed Dec 18, 2019 600,166 vehicles

Control unit/module

Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.

Risk and remedy
Risk
If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.
Filed by
Ford Motor Company (manufacturer number 19S54)

Stability and traction control complaints across Fusion years

Questions about stability and traction control problems

How common are stability and traction control problems on the 2010 Ford Fusion?

155 owners have reported stability and traction control problems to NHTSA, 3% of all complaints for this model year.

Is there a recall for stability and traction control problems on the 2010 Ford Fusion?

Yes. 1 recall for this model year concerns the stability control: 19V904000.