Owners of the 1993 Ford Ranger have reported 60 brakes problems to NHTSA, 26% of all complaints about this model year.
Where owners named a specific part, the most common were foundation components (20), antilock/traction control/electronic limited slip (16), and conventional (15).
The typical report came at around 84,000 miles, and complaints were filed between January 1995 and June 2011.
These brakes complaints include 11 crashes, 3 injuries, and 1 death.
For comparison, the 1994 Ranger has the most brakes complaints of any year, with 116.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
2 recalls for this model year involve the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Jun 201193,000 milesCA
On my 1993 Ford Ranger,my brake & clutch mounting bracket failed due to stress fracture of welds. This caused lose of brakes and use of clutch. Ford has a recall on failure of studs on the power brake booster that is mounted on this bracket, but nothing on the failure of the bracket.
Owner complaint 10407219 filed with NHTSA
BrakesFiled Dec 2010130,000 milesNJ
Tl*the contact owns 1993 Ford Ranger. While the vehicle was parked the contact tried to apply the parking brake and it would lock in place. The vehicle was not taken to the dealer to be repaired. The dealer was contacted and stated that there was a recall on that year, make and model but his vehicle was not included. The approximate failure mileage was 130,000.
Owner complaint 10369646 filed with NHTSA
BrakesFiled May 200715,000 milesGA
I never received any recall notification on NHTSA campaign ID number 06e026000. The wedge alluded to in NHTSA recall was installed on the truck and did not solve the problem. The emergency brake would still not lock into place, and now did not work AT all.
The studs which attach the brake master cylinder to the power brake vacuum booster assembly CAN develop stress corrosion cracking after being operated for an extended period of time in the southern california location.
Risk and remedy
Risk
If a crack occurs, it could result in one or both studs fracturing. The master cylinder could then separate from the vacuum booster, when the brakes are applied, preventing the service brakes from activating increasing the risk of a vehicle accident.
Remedy
Dealers will replace the power brake vacuum booster assembly.
The parking brake control self-adjust pawl does not line up properly with the self-adjust rachet causing the pawl to slip over one or more teeth in the rachet.
Risk and remedy
Risk
When the above occurs, it CAN result in parking brake system ineffectiveness. The parking brake will not hold the vehicle, causing the vehicle to roll freely, if the transmission is not left in gear.
Remedy
A wedge will be installed which will serve to lock the parking brake self-adjust mechanism pawl into engagement with the rachet. Also, owners will be advised to release and reapply the parking brake whenever tooth skip occurs and will be reminded to always turn off the engine and leave the vehicle in gear when the vehicle is parked.