Owners of the 1994 Ford Ranger have reported 116 brakes problems to NHTSA, 26% of all complaints about this model year.
Where owners named a specific part, the most common were foundation components (47), conventional (39), and antilock/traction control/electronic limited slip (24).
The typical report came at around 126,000 miles, and complaints were filed between January 1995 and August 2015.
These brakes complaints include 28 crashes and 6 injuries.
No other Ranger year has as many brakes complaints.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
2 recalls for this model year involve the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Aug 2015IN
Noticed a clunking noise if the right front of the vehicle during turning, stopping and going over small bumps. Figured it would be something simple and took it to my mechanic. He said it was a rusted frame mount and to take it to a body shop. So I did and the second opinion was that the frame was rusted completely in two just if front of the right shock mount. I climbed under the vehicle and it truly is rusted completely into two pieces. I don't know what is keep the front right wheel where it belongs. Unsafe to drive. Parked for now. Where do I turn now? No pun intended.
Owner complaint 10749197 filed with NHTSA
BrakesFiled Mar 2012170,669 milesWVCrash
I applied my brake pedal and it was fine one second and then lost pressure and went to the floor with a popping feeling on the right front wheel and then I turn my wheel into the other lane to avoid hitting the car in front of me and a car came from no where in the other direction and hit my 1994 Ranger on the right rear wheel and bedside .
Owner complaint 10451521 filed with NHTSA
BrakesFiled Aug 2011270,000 milesVA
Tl* the contact owns a 1994 Ford Ranger. The contact stated hat while the vehicle was parked on a level road surface with the emergency brake engaged, the vehicle unexpectedly rolled for a few seconds. There was a recall associated with the NHTSA campaign ID number 94v169001 (parking brake: conventional); however the recall expired and the VIN was not included. The manufacturer was notified of the faulty emergency brake. The contact planned to repair the vehicle himself. The approximate failure mileage was 270,000.
The studs which attach the brake master cylinder to the power brake vacuum booster assembly CAN develop stress corrosion cracking after being operated for an extended period of time in the southern california location.
Risk and remedy
Risk
If a crack occurs, it could result in one or both studs fracturing. The master cylinder could then separate from the vacuum booster, when the brakes are applied, preventing the service brakes from activating increasing the risk of a vehicle accident.
Remedy
Dealers will replace the power brake vacuum booster assembly.
The parking brake control self-adjust pawl does not line up properly with the self-adjust rachet causing the pawl to slip over one or more teeth in the rachet.
Risk and remedy
Risk
When the above occurs, it CAN result in parking brake system ineffectiveness. The parking brake will not hold the vehicle, causing the vehicle to roll freely, if the transmission is not left in gear.
Remedy
A wedge will be installed which will serve to lock the parking brake self-adjust mechanism pawl into engagement with the rachet. Also, owners will be advised to release and reapply the parking brake whenever tooth skip occurs and will be reminded to always turn off the engine and leave the vehicle in gear when the vehicle is parked.