Owners of the 1998 GMC Sierra 1500 have reported 18 brakes problems to NHTSA, 31% of all complaints about this model year.
Where owners named a specific part, the most common were antilock/traction control/electronic limited slip (9), foundation components (2), and antilock (2).
The typical report came at around 78,000 miles, and complaints were filed between May 1998 and November 2012.
These brakes complaints include 1 crash.
For comparison, the 2015 Sierra 1500 has the most brakes complaints of any year, with 229.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
1 recall for this model year involves the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Nov 2012167,525 milesMD
Applied break to start truck. Foot went to floor, very weak pedal. Checked brake fluid level, found front reservoir empty. Traced brake lines for leaks. Found portion of rear hard brake line between gas tank and rear axle rusted through AT bend where brake line leaves frame rail and heads to connect to flexible line AT rear differential. Entire area around leak, bottom of bed, frame rail, shock, spring, etc. Dripping with brake fluid. Replaced a previous section of rear brake linearound 125k miles prior to finding out this was a common problem with GMC / chevy trucks.
Owner complaint 10482833 filed with NHTSA
BrakesFiled May 201076,000 milesCT
I was approaching a busy intersection AT a normal speed. When I used the brake it instantly went to the floor. No brakes! I went through the intersection into an empty lot. Thank god no accident. The brake line rotted because GM routed cheap steel lines in areas where sand, salt and water collect. GMC refused to cover the repair and it cost me 500.00.
Vehicle description: light duty pickup trucks and multi-purpose passenger vehicles. One or both front brake rotor/hubs were built with an out-of-specification gray iron that CAN fail during the life of the vehicle.
Risk and remedy
Risk
If a driver continues to drive with a cracked rotor, the cracks could continue around the wheel mounting bolt circle and ultimately result in a wheel separation.
Remedy
Dealers will inspect the rotors for a core date of "287" and, if found, replace the rotor.