Owners of the 2007 Mazda MAZDASPEED3 have reported 15 engine problems to NHTSA, 39% of all complaints about this model year.
Where owners named a specific part, the most common were engine (9).
The typical report came at around 12,000 miles, and complaints were filed between March 2007 and August 2014.
No other MAZDASPEED3 year has as many engine complaints.
Engine and cooling: stalling, loss of power, oil consumption, overheating, knocking, failed internal parts and check-engine faults traced to the engine.
1 recall for this model year involves the engine.
If your problem matches, a dealer repairs it free under the recall.
Complaints15
Typical mileage12k
Crashes / fires0 / 0
Injuries0
Parts named in these complaints
Engine9
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
EngineFiled Aug 201474,200 milesMI
On Saturday 19 July 2014, my wife and I were driving north on highway 131, 18 miles south of grand rapids, mi when without notice the engine's number 1 cylinder blow a hole through the casting and damaging the inner axle shaft carrier bearing. When the engine blew, it caused the car to shake violently causing me, the driver, to lose control of the vehicle. I was able to regain control of the vehicle before the car swerved into an adjacent lane. Prior to the incident the vehicle was in good running condition and had just passed the virginia state inspection a few months prior.
Owner complaint 10625871 filed with NHTSA
EngineFiled Aug 201474,200 milesMI
On Saturday 19 July 2014, my wife and I were driving north on highway 131, 18 miles south of grand rapids, mi when without notice the engine's number 1 cylinder blow a hole through the casting and damaging the inner axle shaft carrier bearing. When the engine blew, it caused the car to shake violently causing me, the driver, to lose control of the vehicle. I was able to regain control of the vehicle before the car swerved into an adjacent lane. Prior to the incident the vehicle was in good running condition and had just passed the virginia state inspection a few months prior.
On certain passenger vehicles, the no. 4 left side engine mount bolt may loosen if a sudden rapid acceleration is repeatedly performed.
Risk and remedy
Risk
If the vehicle is continuously driven under such condition, the no. 4 engine mount bolt may loosen and pull out or break, allowing the transmission to be out of position. In extreme cases, the drive shaft may become detached. If this occurs the vehicle will lose power and will come to a stop, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the no. 4 engine mount bolt with a modified one, and, if necessary, replace the no. 4 engine mount rubber and bracket with new ones free of charge. The recallbegan on july 13, 2007. Owners may contact mazda AT 800-222-5500 .