Mercury · Milan

2009 Mercury Milan Brakes Problems

Midsize car · FWD · Regular

Owners of the 2009 Mercury Milan have reported 115 brakes problems to NHTSA, 51% of all complaints about this model year.

Where owners named a specific part, the most common were antilock (2), foundation components (1), and antilock/traction control/electronic limited slip (1).

The typical report came at around 95,000 miles, and complaints were filed between February 2010 and January 2025.

These brakes complaints include 9 crashes and 2 injuries.

For comparison, the 2008 Milan has the most brakes complaints of any year, with 198.

Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.

1 recall for this model year involves the brakes. If your problem matches, a dealer repairs it free under the recall.
Complaints115
Typical mileage95k
Crashes / fires9 / 0
Injuries2

Parts named in these complaints

  • Antilock2
  • Foundation Components1
  • Antilock/Traction Control/Electronic Limited Slip1

Owners choose these labels when they file, so they are a guide rather than a diagnosis.

What owners say

Brakes Filed Jan 2025 100,000 miles IA

The contact owns a 2009 Mercury Milan. The contact stated while driving at an undisclosed speed, the brake pedal was depressed and traveled to the floorboard. There was no warning light illuminated. The contact engaged the parking brake to stop the vehicle. The vehicle was restarted. The vehicle was taken to the dealer where it was diagnosed and determined that the ABS hydraulic control unit had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and confirmed that the VIN was not included in NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic).

Owner complaint 11633632 filed with NHTSA
Brakes Filed Mar 2023 PA

I received a letter in July of 2021 about the ABS control unit problem my vehicle has. AT the moment that control module is non-functional. To date ford has not produced or made available any of the parts needed for this repair and will not even acknowledge the vehicle when I called them. I would like to know how long I have to drive a vehicle with known defective brakes before ford is forced to complete this repair? There is also a brake fluid issue with this vehicle that cannot be addressed until the non-functioning ABS module is repaired. The dealer refused to change the said corrosive fluid because of the non-functioning ABS module.

Owner complaint 11511028 filed with NHTSA
Brakes Filed Jun 2022 IL

Brake pedal going to floor extending stopping distance. Early in 2022 I took it in for recall S1954. HCU passed test and dealer replaced DOT3 brake fluid with DOt4. 5/24/2022 Brake pedal started going to floor again. Dealer performed self test of hcu and electronic bleed hcu and said pedal was somewhat better but needed $400 of brake work to for Brake pads, lining and turn rotors. Car functioned fine for a few days. In early June I was driving on a wet street and put on the brakes. It appeared the ABS system was trying to kick in and suddenly the pedal again went to the floor. I was barely able to miss rear-ending a city bus.

Owner complaint 11467509 filed with NHTSA

Related recalls

19V904000 Filed Dec 18, 2019 600,166 vehicles

Control unit/module

Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.

Risk and remedy
Risk
If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.
Filed by
Ford Motor Company (manufacturer number 19S54)

Brakes complaints across Milan years

Questions about brakes problems

How common are brakes problems on the 2009 Mercury Milan?

115 owners have reported brakes problems to NHTSA, 51% of all complaints for this model year.

Is there a recall for brakes problems on the 2009 Mercury Milan?

Yes. 1 recall for this model year concerns the brakes: 19V904000.