Mercury · Mountaineer

1998 Mercury Mountaineer Recalls

Special purpose vehicle · 4WD/AWD, RWD · Regular

There are 5 safety recalls on file for the 1998 Mercury Mountaineer, filed between March 1998 and August 2003. Each one is repaired free by a franchised Mercury dealer, no matter how old the car is or who owns it now.

A recall covers a range of build dates, so not every 1998 Mountaineer is affected by every campaign below. To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.

2003 (1)

03V281000 Filed Aug 5, 2003 1,552,880 vehicles

Recliner

On certain sport utility vehicles equipped with high back seats, the upper bolt on the driver's side high back seat, that attaches the seat recliner mechanism to the seat back frame, could fracture. If the bolt fractures and does not jam in the seat back frame, the seat back may recline until it makes contact with an object behind the seat, such as the second row seat cushion.

Risk and remedy
Risk
The driver could potentially lose contact with the steering wheel or foot pedals during such an event, increasing the risk of a crash.
Remedy
Dealers will replace the driver seat upper bolt with a metal spacer and bolt. In addition, seats with tubular back frames will have the fully threaded lower recliner bolt replaced with a partially threaded bolt. Owner notification began on august 29, 2003. Owners should contact ford AT 1-800-392-3673.
Filed by
FORD MOTOR COMPANY (manufacturer number 03S04)

2000 (1)

00V422000 Filed Dec 27, 2000 220,000 vehicles

Vehicle speed control

Vehicle description: sport utility vehicles equipped with 4.0l sohc engines and still retain the original throttle body (part numbers 97jf-9e926ab or 97jf-9e926-AC). Some of the original throttle bodies installed allowed a gap between the plate and bore to be built too narrow. This reduced clearance allowed the engine deposits normally present in the throttle body to contact or bridge the gap. If the engine deposits bridged the gap between the throttle plate and bore and then hardened, on the initial application of the accelerator pedal after the engine has cooled, the operator would need to apply additional force to the accelerator pedal to break the bridge.

Risk and remedy
Risk
This could result in engine surge when the accelerator pedal breaks free.
Remedy
Dealers will replace the original throttle bodies.
Filed by
FORD MOTOR COMPANY (manufacturer number 00S58)

1999 (2)

99V164000 Filed Jun 29, 1999 854,288 vehicles

Hood latch

Vehicle description: sport utility vehicles. The secondary hood latch may corrode AT the latch pivot and stick in the open position.

Risk and remedy
Risk
If this occurs and the primary hood latch is either not engaged or is released, a hood fly-up could occur.
Remedy
Dealers will install a secondary hood latch with components that are coated prior to assembly for improved latch pivot corrosion protection.
Filed by
FORD MOTOR COMPANY (manufacturer number 99S18)
99V062001 Filed Mar 30, 1999 898,739 vehicles

Vehicle speed control

Vehicle description: certain 1997-1999 rhd explorer equipped with 4.0l ohv/sohc engines and cruise control built from may 29, 1996 through march 4, 1999; 1998-1999 explorer/mountaineers equipped with 4.0l ohv/sohc or 5.0l engines or 1998-1999 rangers equipped with 2.5l, 3.0l ffv/efi or 4.0l engines and cruise control built from january 5, 1998 through march 4, 1999; 1998-1999 mustangs equipped with 3.8l, 4.6l 2-valve or 4-valve engines and cruise control built from march 2, 1998 through march 4, 1999; 1999 f250/f350/f450/f550 (over 8,500 lbs.) trucks equipped with 5.4l or 6.8l engines and cruise control built from march 2, 1998 through march 4, 1999; and 1999 f-53 stripped chassis equipped with 5.4l or 6.8l engines and cruise control built from march 2, 1998 through march 4, 1999. A cruise control cable CAN interfere with the speed control servo pulley and not allow the throttle to return to idle when disengaging the cruise control.

Risk and remedy
Risk
If the cruise control is used and this condition is present, a stuck throttle could result, which could potentially result in a crash.
Remedy
Dealers will replace the cruise control cables. AT the present time, the replacement cables are not available. Customers are being advised not to use the cruise control system until a replacement CAN be made.
Filed by
FORD MOTOR COMPANY (manufacturer number 99S09)

1998 (1)

98V060000 Filed Mar 19, 1998 320,000 vehicles

Hoses, lines/piping, and fittings

Vehicle description: multi-purpose passenger vehicles equipped with 4.0l single overhead cam engines. The engine fuel lines CAN be damaged if the vehicle is jump started and the ground cable is attached to the fuel line bracket that is located near the battery. Since the bracket is not grounded, the stainless steel fuel line braid could act as a ground potentially overheating the ptfe inner liner of the fuel line resulting in damage to the fuel line.

Risk and remedy
Risk
The fuel lines CAN leak, and in the presence of an ignition source, a fire could potentially result.
Remedy
Dealers will install a warning label on the fuel line bracket advising owners not to use it for a jump start ground. Also a revised bolt will be installed in the alternator bracket to provide a convenient jump start ground location.
Filed by
FORD MOTOR COMPANY (manufacturer number 98S09)

Recall questions

How many recalls does the 1998 Mercury Mountaineer have?

NHTSA lists 5 recalls for the 1998 Mercury Mountaineer.

How do I know if my car's recall was fixed?

Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.