There are 7 safety recalls on file for the 1999 Mercury Mountaineer,
filed between March 1999 and August 2007.
Each one is repaired free by a franchised Mercury dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 1999 Mountaineer is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
2007 (1)
07V336000
Filed Aug 3, 2007 3,600,000 vehicles
On certain pickup trucks, passenger vehicles, sport utility vehicles, and motor homes chassis, the speed control deactivation switch may, under certain conditions, leak internally and then overheat, smoke, or burn.
Risk and remedy
- Risk
- This could result in an underhood fire.
- Remedy
- Dealers will install a fused wiring harness. Owners of the passenger cars included in this campaign will be instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected as an interim repair. As soon as repair parts are available (expected october 2007), owners will be instructed to return to the dealers for installation of a fused wiring harness. The recall began on august 13, 2007, and mailing completed by september 19, 2007. Owners may contact ford AT 1-888-222-2751.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 05S28)
2003 (2)
03V281000
Filed Aug 5, 2003 1,552,880 vehicles
On certain sport utility vehicles equipped with high back seats, the upper bolt on the driver's side high back seat, that attaches the seat recliner mechanism to the seat back frame, could fracture. If the bolt fractures and does not jam in the seat back frame, the seat back may recline until it makes contact with an object behind the seat, such as the second row seat cushion.
Risk and remedy
- Risk
- The driver could potentially lose contact with the steering wheel or foot pedals during such an event, increasing the risk of a crash.
- Remedy
- Dealers will replace the driver seat upper bolt with a metal spacer and bolt. In addition, seats with tubular back frames will have the fully threaded lower recliner bolt replaced with a partially threaded bolt. Owner notification began on august 29, 2003. Owners should contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 03S04)
On certain sport utility vehicles equipped with speed control and 4.0l sohc engines, if the strand cover on the speed control cable becomes flared AT the end, the speed control cable may bind when the speed control is activated.
Risk and remedy
- Risk
- The throttle return spring force may not be sufficient to overcome the binding condition when the speed control is disengaged. Braking function would be maintained though stopping distances may be increased.
- Remedy
- Dealers will inspect the speed control cable and, if necessary, replace it. Owner notification began august 29, 2003. Owners should contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 03S03)
2000 (1)
Vehicle description: multi-purpose vehicles equipped with 4.0l engines and all-time 4-wheel drive (a4wd) powertrains. The generic electronic module (gem) could experience a condition referred to as "lock-up" in which the gem controlled electronic functions (e.g., front windshield wipers, interior lights, 4X4 system, etc.) could not be turned on or, in some cases if the function is on, could not be turned off.
Risk and remedy
- Risk
- An inoperative windshield wiper system could affect driver visibility, increasing the risk of a crash.
- Remedy
- Dealers will install a resistor in the gem circuit.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S04)
1999 (3)
99V164000
Filed Jun 29, 1999 854,288 vehicles
Vehicle description: sport utility vehicles. The secondary hood latch may corrode AT the latch pivot and stick in the open position.
Risk and remedy
- Risk
- If this occurs and the primary hood latch is either not engaged or is released, a hood fly-up could occur.
- Remedy
- Dealers will install a secondary hood latch with components that are coated prior to assembly for improved latch pivot corrosion protection.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 99S18)
Vehicle description: sport utility vehicles. The right front brake line to the hydraulic control unit (hcu) connection could separate causing the line to leak when the brake pedal is applied.
Risk and remedy
- Risk
- This could result in a loss of brake pressure to the front wheels, increasing the stopping distance.
- Remedy
- Dealers will replace the flare nut on the brake line.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 99S16)
99V062001
Filed Mar 30, 1999 898,739 vehicles
Vehicle description: certain 1997-1999 rhd explorer equipped with 4.0l ohv/sohc engines and cruise control built from may 29, 1996 through march 4, 1999; 1998-1999 explorer/mountaineers equipped with 4.0l ohv/sohc or 5.0l engines or 1998-1999 rangers equipped with 2.5l, 3.0l ffv/efi or 4.0l engines and cruise control built from january 5, 1998 through march 4, 1999; 1998-1999 mustangs equipped with 3.8l, 4.6l 2-valve or 4-valve engines and cruise control built from march 2, 1998 through march 4, 1999; 1999 f250/f350/f450/f550 (over 8,500 lbs.) trucks equipped with 5.4l or 6.8l engines and cruise control built from march 2, 1998 through march 4, 1999; and 1999 f-53 stripped chassis equipped with 5.4l or 6.8l engines and cruise control built from march 2, 1998 through march 4, 1999. A cruise control cable CAN interfere with the speed control servo pulley and not allow the throttle to return to idle when disengaging the cruise control.
Risk and remedy
- Risk
- If the cruise control is used and this condition is present, a stuck throttle could result, which could potentially result in a crash.
- Remedy
- Dealers will replace the cruise control cables. AT the present time, the replacement cables are not available. Customers are being advised not to use the cruise control system until a replacement CAN be made.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 99S09)
Recall questions
How many recalls does the 1999 Mercury Mountaineer have?
NHTSA lists 7 recalls for the 1999 Mercury Mountaineer.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.