Owners of the 2000 Nissan Sentra have reported 29 electrical problems to NHTSA, 17% of all complaints about this model year.
Where owners named a specific part, the most common were wiring (4), ignition (3), and horn (1).
The typical report came at around 86,000 miles, and complaints were filed between December 2001 and March 2018.
These electrical complaints include 1 crash and 2 fires.
For comparison, the 2019 Sentra has the most electrical complaints of any year, with 65.
Batteries, alternators, wiring, fuses, ignition, instrument clusters, infotainment and body electronics, including warning lights and parasitic drain.
1 recall for this model year involves the electrical.
If your problem matches, a dealer repairs it free under the recall.
Complaints29
Typical mileage86k
Crashes / fires1 / 2
Injuries0
Parts named in these complaints
Wiring4
Ignition3
Horn1
Alternator/Generator/Regulator1
Instrument Cluster/Panel1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
Electrical systemFiled Mar 2018IN
Takata inflators: my car lost power and will not shift into od I need to know if there is a recall on it or whatever is wrong with it my car is a 2000 Nissan Sentra
Owner complaint 11076586 filed with NHTSA
Electrical systemFiled Feb 2015IN
2000 Nissan Sentra cranks but will not start. The car was starting and running got back to my place and . About a hour or two later had some thing to do .got in the car tried to start the car and it would not start.motor turn over but would not start.
Owner complaint 10683416 filed with NHTSA
Electrical systemFiled Mar 2014TN
Car has always had a slight idle issue..... When u start it you have to press the gas a bit or else it immediately dies. Also sometimes if you come to a stop the idle jumps up and down..... Hasn't ever completely died in those incidents. My complaint is about the ignition coil fuse. A bit over a week ago the car was fine all day and then all of a sudden wouldn't start. It ended up being the fuse. We replaced it and the car was fine for a while. Today I got in it go to work and it wouldn't start. Once again it was the fuse. While AT work my husband replaced it and it blew as soon as he turned the key to start the car.
On certain passenger vehicles equipped with the qg18de engine or qr25de engines, the foam material used for the interior lining of the electronic control module (ECM) box emits sulfur as it cures.
Risk and remedy
Risk
If one of the resistors inside the ECM has a crack on the surface coating, the gas may cause corrosion of the resistor. This could cause the malfunction indicator light to come on, poor drivability (idle instability, poor accelerator), or the engine to stop running during vehicle operation, which could result in a crash.
Remedy
Dealers will remove the inside lining material from the ECM box. Owner notification began on december 22, 2003. Owners should contact nissan AT 1-800-647-7261.
Filed by
NISSAN NORTH AMERICA, INC. (manufacturer number P3163)