There are 5 safety recalls on file for the 1993 Saab 9000,
filed between February 1994 and May 1999.
Each one is repaired free by a franchised Saab dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 1993 9000 is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
1999 (1)
Vehicle description: passenger vehicles. Moisture CAN enter the air bag inflatable restraint electronic control module (ECM) and cause corrosion on portions of the ECM printer circuit boards.
Risk and remedy
- Risk
- This corrosion CAN possibly create open connections in circuits which control the restraint deployment, possibly causing inadvertent air bag deployment.
- Remedy
- Dealers will inspect the exterior of the ECM. If there is no indication of moisture, a cover will be installed over the ECM. If there is indication of moisture, the dealer will replace the ECM and install a cover over the new ECM.
- Filed by
- SAAB CARS USA, INC.
1995 (1)
Moisture CAN follow the electrical harness and enter the pressure switch connector causing corrosion and malfunction of the switch.
Risk and remedy
- Risk
- The corrosion causes a deterioration of the electricalswitch connection and CAN result in false illumination of ABS and/or the brake warning lights and/or the loss of power assistance because of no hydraulic pumpoperation. Loss of power assist increases the driver's brake pedal effort required for stopping which CAN result in extended braking distances.
- Remedy
- Dealers will inspect the electrical connections to the ABS pressure switch terminals for corrosion and install a shrink hose to the wiring harness to avoid moisture entering the connection. Pressure switches with corroded connectors will be replaced.
- Filed by
- SAAB CARS USA, INC.
1994 (3)
During low energy frontal impact collisions, the front crossmember CAN contact the metal tubing portion of the cooler hose assembly; and/or the hose assembly CAN break and leak oil onto the hot exhaust manifold or the turbocharger.
Risk and remedy
- Risk
- Oil leaking on these hot engine surfaces CAN ignite and cause a vehicular fire.
- Remedy
- Dealers will install a protective cover which will protect the cooler and hoses from other structural components in low energy front impacts.
- Filed by
- SAAB CARS USA, INC.
A number of brake light switches have an oval-shaped piston which CAN get stuck under certain conditions. Other switches were mounted so that both locking tabs are not completely engaged in the mounting bracket. If one side is not engaged, the switch is misaligned with the pedal mechanism and CAN bind the piston movement, which CAN cause the brake light switch to stick in the "off" or "on" position.
Risk and remedy
- Risk
- This results in either the brake lights remaining on constantly or the brake lights not illuminating when the brakes are applied. This results in inaccurate signals of brake operation to other vehicle operators, and could result in an accident.
- Remedy
- Dealers will inspect brake light switches. For vehicles with the oval-shaped piston and for vehicles with misaligned brake light switches, the brake light switch will be replaced.
- Filed by
- SAAB CARS USA, INC.
The fuel filler and tank ventilation hoses may develop cracks under the securing hose clamps, resulting in fuel leakage.
Risk and remedy
- Risk
- Fuel leaks may result in a fire if an ignition sourceis present.
- Remedy
- The fuel filler and fuel ventilation hoses will be replaced with new hoses. The five securing hose clamps will be replaced by a new type with a shield that prevents damage to the hose when tightened.
- Filed by
- SAAB CARS USA, INC.
Recall questions
How many recalls does the 1993 Saab 9000 have?
NHTSA lists 5 recalls for the 1993 Saab 9000.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.