There are 4 safety recalls on file for the 1994 Saab 9000,
filed between May 1994 and May 1999.
Each one is repaired free by a franchised Saab dealer, no matter how old the car is or who owns it now.
A recall covers a range of build dates, so not every 1994 9000 is affected by every campaign below.
To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.
1999 (1)
Vehicle description: passenger vehicles. Moisture CAN enter the air bag inflatable restraint electronic control module (ECM) and cause corrosion on portions of the ECM printer circuit boards.
Risk and remedy
- Risk
- This corrosion CAN possibly create open connections in circuits which control the restraint deployment, possibly causing inadvertent air bag deployment.
- Remedy
- Dealers will inspect the exterior of the ECM. If there is no indication of moisture, a cover will be installed over the ECM. If there is indication of moisture, the dealer will replace the ECM and install a cover over the new ECM.
- Filed by
- SAAB CARS USA, INC.
1995 (1)
Moisture CAN follow the electrical harness and enter the pressure switch connector causing corrosion and malfunction of the switch.
Risk and remedy
- Risk
- The corrosion causes a deterioration of the electricalswitch connection and CAN result in false illumination of ABS and/or the brake warning lights and/or the loss of power assistance because of no hydraulic pumpoperation. Loss of power assist increases the driver's brake pedal effort required for stopping which CAN result in extended braking distances.
- Remedy
- Dealers will inspect the electrical connections to the ABS pressure switch terminals for corrosion and install a shrink hose to the wiring harness to avoid moisture entering the connection. Pressure switches with corroded connectors will be replaced.
- Filed by
- SAAB CARS USA, INC.
1994 (2)
During low energy frontal impact collisions, the front crossmember CAN contact the metal tubing portion of the cooler hose assembly; and/or the hose assembly CAN break and leak oil onto the hot exhaust manifold or the turbocharger.
Risk and remedy
- Risk
- Oil leaking on these hot engine surfaces CAN ignite and cause a vehicular fire.
- Remedy
- Dealers will install a protective cover which will protect the cooler and hoses from other structural components in low energy front impacts.
- Filed by
- SAAB CARS USA, INC.
One of the bulbs in each of the brake light lower outboard lamp assemblies may not have been properly wired, resulting in improper tail light illumination on brake application. This does not conform to the requirements of fmvss no 108, "lamps, reflective devices, and associated equipment."
Risk and remedy
- Risk
- Consequence of non-compliance: improper illumination of brake lights during brake application may not signal following drivers of the operator's intent to slow or stop and could result in a vehicle collision.
- Remedy
- Dealers will modify the brake light outboard lamp assemblies to meet fmvss requirements.
- Filed by
- SAAB CARS USA, INC.
Recall questions
How many recalls does the 1994 Saab 9000 have?
NHTSA lists 4 recalls for the 1994 Saab 9000.
How do I know if my car's recall was fixed?
Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.