Owners of the 2008 Dodge Ram 2500 have reported 175 steering problems to NHTSA, 55% of all complaints about this model year.
Where owners named a specific part, the most common were linkages (16) and gear box (other than rack and pinion) (1).
The typical report came at around 60,000 miles, and complaints were filed between March 2008 and January 2022.
These steering complaints include 5 crashes, 1 fire, and 1 injury.
For comparison, the 2006 Ram 2500 has the most steering complaints of any year, with 231.
Power steering pumps and electric assist, racks, columns, tie rods and sudden loss of steering assist.
Related recalls
Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 RAM 2500 4X4 and 3500 4X4 trucks, 2008-2012 Dodge RAM 3500 4x2 Cab Chassis, and model year 2008 Dodge RAM 1500 Mega Cab 4x4. The left tie rod assembly may break.
Risk and remedy
- Risk
- A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
- Remedy
- Chrysler notified owners on January 16, 2014 that dealers would inspect vehicles and replace the steering linkage assembly, if necessary. On or about February 27, 2014, Chrysler ceased its recall remedy program due to parts quality concerns, and then re-initiated it on or about April 14, 2014. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N49.
- Filed by
- Chrysler Group LLC (manufacturer number N49)
Chrysler Group LLC (Chrysler) is recalling certain model year 2003-2008 Dodge RAM 2500 4x4 and 3500 4x4, model year 2007-2008 Dodge RAM 3500 4x2 Cab Chassis and model year 2006-2008 Dodge RAM 1500 Mega Cab 4x4 trucks manufactured February 12, 2002, through February 13, 2008. The left tie rod assembly may break.
Risk and remedy
- Risk
- A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
- Remedy
- Chrysler notified owners and launched its recall campaign in January 2014. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N62.
- Filed by
- Chrysler Group LLC (manufacturer number N62)
Chrysler is recalling certain model year 2008-2011 dodge ram 2500/3500 4X4, manufactured from february 14, 2008, through march 28, 2011; model year 2008-2011 dodge ram 3500 cab chassis 4x2, manufactured from february 14, 2008, through march 28, 2011; and model year 2008 dodge ram 1500 mega cab 4X4, manufactured from february 14, 2008, through august 15, 2008, because the left tie rod ball stud may fracture. This condition tends to occur during low speed parking lot type maneuvers when the customer is making a tight turn. Additionally, model year 2003-2008 dodge ram 2500/3500 vehicles may have received the affected tie rod assembly as a replacement part during normal service.
Risk and remedy
- Risk
- This condition could result in the potential loss of directional stability in the left hand front wheel, increasing the risk of a crash.
- Remedy
- Dealers will inspect the tie rod ends for relative orientation and replace the left outer tie rod as required and perform a front end toe alignment as needed. This service will be performed free of charge. The safety recall began on october 3, 2011. Owners may contact chrysler AT 1-800-853-1403.
- Filed by
- CHRYSLER GROUP LLC (manufacturer number L16)
Chrysler is recalling 32,782 my 2008-2009 dodge ram 2500, 3500 and 3500 cab chassis pickup trucks equipped with powers and sons steering linkage. The steering linkage drag link inner tie rod to pitman arm ball stud may fracture. Also the steering linkage damper attaching the bracket may yield and shift on the linkage.
Risk and remedy
- Risk
- This could result in a loss of steering control and the restricted ability to turn the vehicle in one direction increasing the risk of a crash without warning.
- Remedy
- Dealers will replace the steering linkage drag link inner tie rod end assembly, and inspect the steering linkage damper bracket free of charge. The recall is expected to begin on or before february 16, 2009. Owners may contact chrysler AT 1-800-853-1403.
- Filed by
- CHRYSLER LLC (manufacturer number H36)