Owners of the 2011 Dodge Ram 2500 have reported 210 steering problems to NHTSA, 70% of all complaints about this model year.
Where owners named a specific part, the most common were linkages (2) and hydraulic power assist (1).
The typical report came at around 39,000 miles, and complaints were filed between June 2011 and November 2024.
These steering complaints include 3 crashes and 3 injuries.
For comparison, the 2006 Ram 2500 has the most steering complaints of any year, with 231.
Power steering pumps and electric assist, racks, columns, tie rods and sudden loss of steering assist.
2 recalls for this model year involve the steering.
If your problem matches, a dealer repairs it free under the recall.
Complaints210
Typical mileage39k
Crashes / fires3 / 0
Injuries3
Parts named in these complaints
Linkages2
Hydraulic Power Assist1
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
SteeringFiled Nov 2024KS
The steering became uncontrollable and wobbled so violently I could not keep my hands on the wheel. It will be open for inspection at any time. The safety of all other road users and pedestrians were put in grave danger. Due to the complete loss of steering control. This has happened to other ram owners I have talked with as well. The problem was addressed by my local mechanic. He recommended replacing the entire front end steering and suspension components I agreed he did the work, he did the work. I also replaced all four tires with new and had them balanced. Within 2 weeks this death wobble happened.
Owner complaint 11624723 filed with NHTSA
SteeringFiled Mar 2024UT
Yesterday, 3/22/2024, I was driving northbound on I-15, fat left lane, approx. 80 mph/posted highway speed. Suddenly lost steering control on my 2011 Dodge Ram 2500 Cummins diesel truck. Front end/tires began vibrating, all steering control lost, truck veered to the right across 3 lanes of traffic and off into the dirt/sage brush to the right of the highway. It almost rolled over, but I was able to slow it to a stop. My dogs & I could have been killed. I turned the truck off for a few minutes, then re-started the ignition.
Owner complaint 11579069 filed with NHTSA
SteeringFiled Jan 202175,000 milesCO
Tl* the contact owns a 2011 Ram 2500. The contact stated that while driving approximately 65 MPH and making a left turn, the braking system malfunctioned and the vehicle would not immediately slow down. Additionally, the power steering failed causing the steering wheel to become difficult to turn. The contact indicated that the failure had occurred on four separate occasions and occurred while the RPM was below 700 RPM. The vehicle was taken to an independent mechanic who was unable to duplicate the failure. No repairs were performed. The manufacturer was notified of the failure. A dealer was not contacted. The VIN was not available.
Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 RAM 2500 4X4 and 3500 4X4 trucks, 2008-2012 Dodge RAM 3500 4x2 Cab Chassis, and model year 2008 Dodge RAM 1500 Mega Cab 4x4. The left tie rod assembly may break.
Risk and remedy
Risk
A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
Remedy
Chrysler notified owners on January 16, 2014 that dealers would inspect vehicles and replace the steering linkage assembly, if necessary. On or about February 27, 2014, Chrysler ceased its recall remedy program due to parts quality concerns, and then re-initiated it on or about April 14, 2014. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N49.
Chrysler is recalling certain model year 2008-2011 dodge ram 2500/3500 4X4, manufactured from february 14, 2008, through march 28, 2011; model year 2008-2011 dodge ram 3500 cab chassis 4x2, manufactured from february 14, 2008, through march 28, 2011; and model year 2008 dodge ram 1500 mega cab 4X4, manufactured from february 14, 2008, through august 15, 2008, because the left tie rod ball stud may fracture. This condition tends to occur during low speed parking lot type maneuvers when the customer is making a tight turn. Additionally, model year 2003-2008 dodge ram 2500/3500 vehicles may have received the affected tie rod assembly as a replacement part during normal service.
Risk and remedy
Risk
This condition could result in the potential loss of directional stability in the left hand front wheel, increasing the risk of a crash.
Remedy
Dealers will inspect the tie rod ends for relative orientation and replace the left outer tie rod as required and perform a front end toe alignment as needed. This service will be performed free of charge. The safety recall began on october 3, 2011. Owners may contact chrysler AT 1-800-853-1403.