Ford · B700

1991 Ford B700 Recalls

Model year 1991

Recalls 2 NHTSA campaigns
Complaints 1 Most: transmission and drivetrain
Fuel economy n/a No EPA rating
Crash rating pre-2011 NHTSA 5-Star program

There are 2 safety recalls on file for the 1991 Ford B700, filed between March 1994 and June 1994. Each one is repaired free by a franchised Ford dealer, no matter how old the car is or who owns it now.

A recall covers a range of build dates, so not every 1991 B700 is affected by every campaign below. To see which ones apply to your car and whether they were already done, enter its VIN at nhtsa.gov/recalls.

1994 (2)

94V118000 Filed Jun 27, 1994 12,700 vehicles

Rack and pinion

The steering gears have an improperly machined snap ring groove. This CAN cause a fracture of the snap ring with subsequent damage to the recirculating ball guide tube. Also, the o-ring seal in vehicles built after february 1988 does not meet specifications and is inadequate, causing interior leakage around the o-ring / glide ring seal in the steering gear.

Risk and remedy
Risk
The fracture of the snap ring results in increasing deterioration of the ability to turn the vehicle to the right. The driver would experience increased steering efforts or a "crunchy" feeling AT the steering wheel. The inadequate o-ring seal causes momentary reductions in power steering assist AT low speed and certain left turn maneuvers. Both conditions result in decreased steering ability.
Remedy
Dealers will rebuild the steering gear. If a broken snap ring is found during rebuilding, the steering gear will be replaced with a remanufactured unit.
Filed by
FORD MOTOR COMPANY
94V056000 Filed Mar 26, 1994 3,660 vehicles

12v/24v/48v battery

System: electrical system; battery. Vehicle description: medium duty school bus chassis equipped with hydraulic brakes, tilt hoods, 5.9l, 6.6l or 7.6l diesel engines or 6.1l or 7.0l gasoline engines and originally sold or currently registered in connecticut, illinois, indiana, maine, massachusetts, michigan, new hampshire, new jersey, new york, ohio, pennsylvania ,rhode island, vermont, and wisconsin. The battery power junction block mounted on the right fender apron, which serves as an electrical connection point for several engine compartment systems, is susceptible to road splash. The terminals AT the junction block CAN experience corrosion and CAN fracture, causing loss of electrical power and engine shutdown.

Risk and remedy
Risk
Engine shutdown, loss of power steering assist, or loss of hydraulic brake boost CAN occur which may result in loss of vehicle control and an accident.
Remedy
Dealers will replace the junction box, main power terminal the starter or starter relay and terminals AT the existing junction block. The wiring of the hydraulic brake circuit will also be modified by bypassing the junction block. The new terminals will be made from an alloy material more resistant to salt corrosion.
Filed by
FORD MOTOR COMPANY

Recall questions

How many recalls does the 1991 Ford B700 have?

NHTSA lists 2 recalls for the 1991 Ford B700.

How do I know if my car's recall was fixed?

Enter your 17-character VIN at nhtsa.gov/recalls or on the manufacturer's site. It shows any recall that has not been repaired on that specific vehicle.