Owners of the 1993 Ford F-350 have reported 28 brakes problems to NHTSA, 28% of all complaints about this model year.
Where owners named a specific part, the most common were foundation components (17), antilock/traction control/electronic limited slip (14), and conventional (1).
The typical report came at around 190,000 miles, and complaints were filed between January 1995 and November 2015.
These brakes complaints include 4 crashes and 1 injury.
For comparison, the 1999 F-350 has the most brakes complaints of any year, with 78.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
1 recall for this model year involves the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Nov 2015190,000 milesIA
Had both of my steer tires blow out going down the high way right side I had a trailer on and the other I had just got on to the interstate. Put a hole in my floor on driverside and broke the brake line on the driverside as well. Passenger side just let loose with no warning. I still have all four tires and the tread. These were 235/85r16
Owner complaint 10788474 filed with NHTSA
BrakesFiled Aug 200845,000 milesTX
Tl*the contact owns a 1993 Ford f350. The contact stated that the parking brake system was ineffective. The parking brake does not hold the vehicle and causes it to roll freely. He took the vehicle to the dealer on two occasions and they replaced the brake cables twice AT the cost of $300 each. When the failure resurfaced, the contact called the manufacturer in reference to NHTSA campaign ID number 94v169001 (parking brake:conventional) and was informed that his VIN was not included in the recall. The contact would be responsible for the repairs. The failure mileage was 45,000 and current mileage was 202,000.
Owner complaint 10237995 filed with NHTSA
BrakesFiled Jun 1998OH
I had to stop suddenly, and the brake pedal went to the floor, and didn't slow the vehicle down. I swirved to miss a car, and was side swiped by a truck. If the brakes would have worked properly, the accident would have been avoidable.
The parking brake control self-adjust pawl does not line up properly with the self-adjust rachet causing the pawl to slip over one or more teeth in the rachet.
Risk and remedy
Risk
When the above occurs, it CAN result in parking brake system ineffectiveness. The parking brake will not hold the vehicle, causing the vehicle to roll freely, if the transmission is not left in gear.
Remedy
A wedge will be installed which will serve to lock the parking brake self-adjust mechanism pawl into engagement with the rachet. Also, owners will be advised to release and reapply the parking brake whenever tooth skip occurs and will be reminded to always turn off the engine and leave the vehicle in gear when the vehicle is parked.