Owners of the 1997 Ford F-350 have reported 32 brakes problems to NHTSA, 21% of all complaints about this model year.
Where owners named a specific part, the most common were foundation components (16), antilock/traction control/electronic limited slip (16), and conventional (3).
The typical report came at around 97,000 miles, and complaints were filed between December 1997 and March 2010.
These brakes complaints include 4 crashes and 3 fires.
For comparison, the 1999 F-350 has the most brakes complaints of any year, with 78.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
1 recall for this model year involves the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Mar 2010280,000 milesVAFire
Tl*the contact owns a 1997 Ford F-350 with a diesel engine. The contact stated that when he stopped AT a traffic light, stop, the brake pedal felt unusually weak and there was a strong odor of brake fluid in the vehicle. The contact then accelerated to speeds of 10 MPH and made a turn. In doing so, he noticed flames from underneath the hood near the master cylinder. The engine was shut off and the fire department was called to extinguish the fire. There were no injuries. A fire report was filed accordingly.
Owner complaint 10322892 filed with NHTSA
BrakesFiled Jun 200897,000 milesNJCrash
A steel brake line on my truck rusted and ruptured causing a complete brake failure. This is the second occurrence of this problem on this vehicle. The brake line had rusted and had a partial failure, causing a leak. The rusted section was replaced about 5 years ago. The recent line failure caused an accident.
Owner complaint 10230411 filed with NHTSA
BrakesFiled Nov 200482,000 milesKY
While braking, with no warning, brakes failed. Brake line running from diverter to rear axle rusted through behind front fuel tank AT plastic bracket. There was no pedal resistance and no braking AT all. All fluid was lost. The hole in the line is about 0.250 inch long and about 0.045 inch wide. There was never a problem or a soft pedal prior to this. Luckily this occurred in a valley in a driveway while turning around so there was no damage. This would have been potentially catastrophic had it occurred while driving on the road or while maneuvering on a steep grade. The truck is clean with no body rust. I AM replacing the brake line.