Owners of the 2010 Ford Fusion have reported 548 brakes problems to NHTSA, 11% of all complaints about this model year.
Where owners named a specific part, the most common were antilock/traction control/electronic limited slip (6), antilock (6), and foundation components (1).
The typical report came at around 110,000 miles, and complaints were filed between June 2009 and October 2026.
These brakes complaints include 34 crashes, 2 fires, and 14 injuries.
No other Fusion year has as many brakes complaints.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
1 recall for this model year involves the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Oct 2026175,000 milesMO
The contact owns a 2010 Ford Fusion. The contact stated that the ABS warning light was illuminated. The contact stated that an independent mechanic replaced the ABS sensors; however, the failure persisted. The contact stated that while driving at approximately 5-10 MPH, the brake pedal went to the floorboard while depressing the brake pedal, causing the stopping distance to be significantly extended. The vehicle was taken to the dealer, where it was diagnosed with ABS pump failure, which resulted in the rear calipers freezing.
Owner complaint 11773242 filed with NHTSA
BrakesFiled Sep 2026CT
My brakes felt mushy for a couple days. Next day br a ke fluid dash light came on. brake fluid was so low couldn't see it. Went to autozone bought brake fluid .dot 3 per internet. Internet went on to share the fact thi s p r oblem was recalled. I h a v e none open says major safety problem tow xar immediately.im on s t at e assistance i can't pay to fix
Owner complaint 11766161 filed with NHTSA
BrakesFiled Sep 2026GA
We have had multiple issues with the ABS and HCU since we bought this car used a couple years ago. We've replaced the ABS Module and HCU and had Ford reprogram it and are still having issues. The brakes go out fully and I went through a red light. The ABS and Traction control and check brake system lights come on. We've spent a couple thousand dollars trying to fix this issue. The brakes have gone out before this incident as well around 95k miles and intermittently since. If needed, contact for invoices.
Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.
Risk and remedy
Risk
If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S54.