Owners of the 1992 GMC Yukon have reported 12 brakes problems to NHTSA, 63% of all complaints about this model year.
Where owners named a specific part, the most common were antilock/traction control/electronic limited slip (9), foundation components (4), and antilock (2).
Complaints were filed between January 1995 and July 1999.
These brakes complaints include 1 crash and 1 death.
For comparison, the 1999 Yukon has the most brakes complaints of any year, with 113.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
1 recall for this model year involves the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Jun 1999MI
Problem 1, brakes: the ABS system states in the owners manual that in the event of an ABS failure the braking system will revert back to a non ABS mode. In my case the ABS pump is stuck in the "dump" mode whick fesults in all pressure being lost to the reaf brakes. This was a very dangerous situation. The local GMC dealer, riverside motors, indicated that there is pressure to the rear brakes and that the ABS is just dissabled. With new rear shoes properly installed and adjusted the rear whells will spin freely with the brakes applied. The ABS warning light is lit as well as the brake warning light.
The pivot bolt holding the brake pedal to its support bracket may be improperly tightened and may not have engaged the locking material on the bolt. The bolt CAN disengage from the nut.
Risk and remedy
Risk
If the pivot bolt disengages from the nut while thevehicle is in motion, there will be a loss of brake control and could result ina vehicle accident.
Remedy
Dealers should inspect the hand started brake pedal bolts and torque them to specification.