Owners of the 1991 Ford Explorer have reported 123 brakes problems to NHTSA, 20% of all complaints about this model year.
Where owners named a specific part, the most common were foundation components (78), antilock/traction control/electronic limited slip (56), and power assist (9).
The typical report came at around 145,000 miles, and complaints were filed between January 1995 and December 2021.
These brakes complaints include 18 crashes and 5 injuries.
For comparison, the 1994 Explorer has the most brakes complaints of any year, with 261.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
1 recall for this model year involves the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Dec 2021COCrash
The component that malfunctioned was the abs sensor. It is not available for inspection. I was driving going around 45 in traffic and the drivers side rear brake locked up and spun me out of control and caused me to collide with another vehicle. I only lightly pressed the brakes and it happened suddenly and unexpectedly. It was not inspected before it was towed after the accident. There were no warning lamps.
Owner complaint 11444373 filed with NHTSA
BrakesFiled Jan 2005UT
Transmission went out, then the front main seal. It hasn't been two months and then my heater core went out and AT the same time my heater fan. Also, before the front main seal went out the rotors went bad and I still have problems with the braking system. This has all happened within a years time. I AM thoroughly disgusted and broke. I praised Ford before this, now I wouldn't recommend Ford to anyone I know. I AM a single mother trying to make ends meet and now I have no transportation because I CAN no longer afford to fix this truck.
Owner complaint 10106282 filed with NHTSA
BrakesFiled Jul 2004130,000 milesFL
Vehicle is a 1991 Ford Explorer XLT eddie bauer edition, 4X4 5-speed manual transaxle, 4.0l v6. Vehicle is equipped with rear-wheel anti-lock brakes. Both rear wheels perform uncommanded full lockup after medium application of brake pedal. Condition persists even when pressure to the brake pedal is removed. Vehicle skids to a stop. Full application of the brakes for several seconds is required to release the rear wheel brake drums and restore normal control to the driver. This could easily result in loss of vehicle control. Symptoms present regardless of weather/road conditions, vehicle speed, or maneuver type.
The studs which attach the brake master cylinder to the power brake vacuum booster assembly CAN develop stress corrosion cracking after being operated for an extended period of time in the southern california location.
Risk and remedy
Risk
If a crack occurs, it could result in one or both studs fracturing. The master cylinder could then separate from the vacuum booster, when the brakes are applied, preventing the service brakes from activating increasing the risk of a vehicle accident.
Remedy
Dealers will replace the power brake vacuum booster assembly.