Owners of the 1991 Jeep Cherokee have reported 163 brakes problems to NHTSA, 70% of all complaints about this model year.
Where owners named a specific part, the most common were antilock/traction control/electronic limited slip (109), foundation components (46), and antilock (4).
The typical report came at around 171,000 miles, and complaints were filed between January 1995 and November 2022.
These brakes complaints include 4 crashes and 2 injuries.
For comparison, the 2014 Cherokee has the most brakes complaints of any year, with 211.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
5 recalls for this model year involve the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Nov 2022175,000 milesWA
The contact owns a 1991 Jeep Cherokee. The contact stated while driving 20 MPH, the contact depressed the brake pedal however, the vehicle failed to slow as needed. The brake warning light was illuminated. The depressed the brake pedal with extreme force and the vehicle came to a stop. The dealer was contacted but the vehicle was not diagnosed because the vehicle was an older vehicle. The contact was informed that had already been repaired under NHTSA Campaign Number: 96V260000 (Service Brakes, Hydraulic).
Owner complaint 11492742 filed with NHTSA
BrakesFiled Feb 2019208,970 milesCA
Tl* the contact owns a 1991 Jeep Cherokee. When the contact engaged the brake pedal, it became stiff and had to be depressed several times to stop the vehicle. The contact also had to depress the brake pedal from a greater distance to bring the vehicle to a complete stop. The brake warning indicator remained illuminated. The vehicle was taken to huntington beach chrysler dodge Jeep ram (16701 beach blvd, huntington beach, ca 92647, (714) 841-3999) and a pressure test was performed, which found an internal leak AT the ABS pump and master cylinder.
Owner complaint 11180370 filed with NHTSA
BrakesFiled Aug 2017MN
Tl* the contact owns a 1991 Jeep Cherokee. The contact stated that the vehicle made an abnormal noise and the brake pedal traveled to the floorboard. The contact lost brake functionality while being operated on the highway and the ABS warning indicator illuminated. The contact was able to stop the vehicle. The vehicle was taken to ryan auto mall (located AT 1000 highway 55 e, buffalo, mn) where it was diagnosed that the pump motor assembly was defective and needed to be replaced.
Vehicle description: passenger and multi-purpose vehicles originally sold or currently registered in the states of connecticut, illinois, indiana, maine, maryland, massachusetts, michigan, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, or wisconsin, and the district of columbia. The front disc brake rotors CAN experience severe corrosion if operated for an extensive period in the "salt belt." if the rotors are not replaced, the corrosion CAN eventually compromise the structural integrity of the stamped steel center hub section of the rotor.
Risk and remedy
Risk
The reduced strength CAN allow the cast iron wear surface to separate from the hub, reducing the brake effectiveness of the vehicle.
Remedy
Dealers will replace these rotors with rotors that are coated with a corrosion protection.
Vehicle description: vehicles equipped with antilock brake system (ABS). The antilock brake system (ABS) hydraulic control unit CAN experience excessive brake actuator piston seal wear which could cause pump-motor deterioration.
Risk and remedy
Risk
If this occurs, the ABS function would be lose and reduced power assist would be experienced during vehicle braking. The instrument panel warning lights will signal system impairment and the base manual brakes will remain functional.
Remedy
Dealers will test the vehicle's ABS and repair as necessary. The warranty on all ABS components will be extended to 10 years or 100,000 miles (except for the brake actuator piston assembly and the pump-motor assembly which will have a lifetime coverage). Owners will be reimbursed for previous ABS component repair costs.
Improper insertion/crimping of the hose-to-end fittings of the high pressure hose on the anti-lock brake system CAN cause detachment of the hose from the ABS system, and discharge of hydraulic fluid.
Risk and remedy
Risk
Detachment of the hose from the ABS system causes theloss of the ABS function and hydraulic brake assist, leaving only manual brakesand decreasing stopping ability, which could result in an accident. Discharge ofhydraulic fluid in the area of the hot exhaust system could result in an enginecompartment fire.
Suspension jounce bumper could contact left rear wheel brake tube when suspension is AT full jounce (bounce).
Risk and remedy
Risk
Contact AT full jounce may cause the brake tube tocollapse and restrict the hydraulic brake fluid pressure to the left rear brakewhich affects the braking capability of the vehicle.
Remedy
Replace left rear brake tube with tube designed to eliminate contact with bumper.