Mazda · MPV

1991 Mazda MPV

Special purpose vehicle · RWD · Regular

Owners have filed 66 complaints about the 1991 Mazda MPV with NHTSA, the 6th highest of 16 MPV years.

The largest share concerns the engine (16 complaints, 24% of the total), followed by transmission and drivetrain (16) and brakes (15).

Complaints for this year mention 5 crashes, 1 fire, and 5 injuries. These are owner reports and have not been verified by NHTSA.

NHTSA lists 3 recalls for this model year. The most recent, campaign 15V674000, was filed in October 2015 and concerns the switch.

EPA figures put it at up to 20 MPG combined (18 city, 23 highway) in its most efficient version, out of 3 configurations tested, 3 MPG better than the average special purpose vehicle of 1991.

What owners report

Full breakdown
  • Engine 24% 16
  • Transmission and drivetrain 24% · typically 185,000 miles 16
  • Brakes 23% · typically 68,000 miles · 4 crashes 15
  • Seat belts 9% · typically 100,000 miles · 1 crash 6
  • Other or unknown 6% · typically 185,000 miles 4
  • Fuel system 6% · typically 100,000 miles 4
  • Electrical system 5% 3
  • Body and structure 3% 2
15V674000 Filed Oct 19, 2015 1,368,500 vehicles

Switch

Mazda North American Operations (Mazda) is recalling certain model year 1989-1998 MPV, 1990-1995 323, 1990-1998 Protege, 1992-1993 MX-3, 1993-1995 929, 1993-1997 MX-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.

Risk and remedy
Risk
If the ignition switch overheats there would be an increased risk of a fire.
Remedy
Mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall began on December 17, 2015. Owners may contact Mazda Customer Experience Center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715J.
Filed by
Mazda North American Operations (manufacturer number 8715J)
95V103005 Filed May 24, 1995 360,433 vehicles

Buckle assembly

The front safety belt buckle release buttons CAN break. These red plastic release buttons are marked "press." if a button breaks, pieces CAN fall into the buckle assembly causing the buckle to operate improperly.

Risk and remedy
Risk
The safety belts would not provide adequate protection to an occupant in a vehicle crash.
Remedy
Owners should promptly check the condition and operation of both front safety belt buckles and carefully inspect the red release button for any breaks or cracks. They should ensure that both buckles are operating properly by inserting each latch plate into its buckle, tugging on the belt to make sure the latch is securely locked, and then pressing the release button. The latch plate should pop out of the buckle when the button is pressed. If either release button shows a sign of breaking or cracking or if either buckle fails to operate properly, owners should promptly contact their authorized dealer to schedule an appointment to have the buckle replaced or repaired, free of charge. The manufacturer is developing a remedy designed to prevent failure of the buttons that are not currently broken.
Filed by
MAZDA (NORTH AMERICA),INC
92V027000 Filed Feb 27, 1992 95,074 vehicles

Shoes/linings

The rear brake linings CAN change over time. As the brakes wear, the coefficient of friction CAN increase, producing inconsistent rear brake performance and premature activation of the ABS system.

Risk and remedy
Risk
Inconsistent braking and premature activation of the abssystem CAN cause sudden stops or increased braking distances, and result inincreased risk of vehicle accident.
Remedy
Replace the rear brake assemblies with assemblies whose friction characteristics do not change. This will reduce the risk of premature ABS system activation.
Filed by
MAZDA (NORTH AMERICA),INC

Recent owner reports

Complaints as owners filed them with NHTSA, lightly tidied for readability. They are not verified.

Brakes Filed Oct 2008 45,000 miles WA

The front wheel skidded and the front brake locked up while driving on light snow covered highway. It caused the steering wheel to become immobilized. The driver was unable to maneuver the car and it overturned.

Owner complaint 10244399 filed with NHTSA
Seat belts Filed May 2006 100,000 miles AZ

The seat belts on my 1991 Mazda MPV are simply falling apart. The fuel vapor separator does an inadequate job of keeping gasoline fumes out of the vehicle. There have been recalls on both of these items. When I took it in to the local dealer they only performed an inspection. Both issues remain unresolved. Besides not ever buying another Mazda ever. I would like to see these safety issues resolved.

Owner complaint 10157444 filed with NHTSA
Brakes Filed Jan 2003 90,000 miles VA

While driving, consumer had to stop suddenly and applied brake pedal abruptly. The anti-lock brake system failed and consumer collided with another vehicle. The brakes locked up. Ts

Owner complaint 10004777 filed with NHTSA
20
18city
23highway
20combined MPG
$3,350fuel a year

Most efficient of 3 EPA-tested configurations. Average for 1991 special purpose vehicles: 17.4 MPG.

How 1991 compares with other MPV years

Owner complaints per model year. The highlighted column is this year.

Questions about the 1991 Mazda MPV

Does the 1991 Mazda MPV have any recalls?

Yes. NHTSA lists 3 recalls for the 1991 Mazda MPV, most recently 15V674000 (October 2015) for the switch.

What are the most common problems with the 1991 Mazda MPV?

Owner complaints to NHTSA most often involve the engine (16), transmission and drivetrain (16), and brakes (15).

What gas mileage does the 1991 Mazda MPV get?

The EPA rates it at 18 MPG city, 23 MPG highway and 20 MPG combined for its most efficient version.