Subaru is recalling certain model year 2002-2007 impreza, model year 2003-2008 forester, and model year 2005-2006 saab 9-2x vehicles manufactured from september 5, 2000 through november 26, 2007 originally sold, or currently registered in, massachusetts, maryland, michigan, new hampshire, new york, pennsylvania, vermont, wisconsin, connecticut, delaware, iowa, illinois, indiana, maine, minnesota, missouri, new jersey, ohio, rhode island, west virginia and the district of columbia. The front lower control arms may break AT the hanger brackets due to corrosion if the hanger bracket is exposed to salty and humid environments such as roads containing snow melting agent.
Risk and remedy
- Risk
- A broken control arm CAN result in the loss of control of the vehicle, increasing the risk of a crash.
- Remedy
- Subaru will handle their vehicles and saab will handle theirs. Dealers will inspect the degree of corrosion of the front lower control arms, and will either rustproof or replace them. This service will be performed free of charge. The safety recall is expected to begin during december 2011. Owners may contact subaru AT 1-800-782-2783. Owners may contact saab AT 1-800-955-9007.
- Filed by
- SUBARU OF AMERICA, INC. (manufacturer number WVX-34)
Subaru is recalling certain model year 2002 and 2003 impreza wrx vehicles originally sold in or currently registered in the states of south dakota, nebraska, north dakota, minnesota, idaho, iowa, montana, colorado, wisconsin, new york, wyoming, michigan, alaska, new hampshire, vermont, and maine. During cold starts, typically under extremely cold temperatures, fuel leaks in the fuel delivery line could occur where the line connects with a rubber hose.
Risk and remedy
- Risk
- Fuel leaks, in the presence of an ignition source, could result in a fire.
- Remedy
- Dealers will replace the fuel line free of charge. The recall began on december 31, 2009. Owners may contact subaru AT 1-800-782-2783.
- Filed by
- SUBARU OF AMERICA, INC. (manufacturer number WVK-21)
Subaru is recalling 36,791 my 2002-2003 impreza wagons. The stud bolt(s) of rear gate stay may have been tightened with insufficient tightening torque and a gap may have resulted between the rear gate panel and stud bolt base. After repeated rear gate operations (opening and closing), the rear gate inner panel AT the welding nut may break, which will lead to detachment of the rear gate stay, and the rear gate dropping down.
Risk and remedy
- Risk
- In case someone is underneath or near the rear gate, there is a possibility that a dropping rear gate panel may hit them increasing the risk of injuries.
- Remedy
- Dealers will inspect to see if there is any gap AT the stud bolt of the rear gate stay installation. If a gap is found, the stud bolt will be removed to check for damage to the welding nut. If the weld nut is cracked, the rear gate stay will be replaced free of charge. The recall began on june 2, 2008. Owners may contact subaru AT 1-800-782-2783.
- Filed by
- SUBARU OF AMERICA, INC. (manufacturer number WVD-14)