Owners of the 1994 Ford Crown Victoria have reported 24 brakes problems to NHTSA, 13% of all complaints about this model year.
Where owners named a specific part, the most common were foundation components (15), antilock/traction control/electronic limited slip (7), and conventional (4).
The typical report came at around 140,000 miles, and complaints were filed between January 1995 and March 2023.
These brakes complaints include 3 crashes, 2 injuries, and 2 deaths.
For comparison, the 1992 Crown Victoria has the most brakes complaints of any year, with 74.
Service and parking brakes: pedal feel, ABS and traction modules, rotors, calipers, hoses, master cylinders and brake boosters.
1 recall for this model year involves the brakes.
If your problem matches, a dealer repairs it free under the recall.
Owners choose these labels when they file, so they are a guide rather than a diagnosis.
What owners say
BrakesFiled Mar 2023300,000 milesKY
The contact owns a 1994 Ford Crown Victoria. The contact stated that while his brother was driving at an undisclosed speed, the brake pedal was depressed; however, the pedal became spongy. Additionally, the ABS warning light was illuminated. The contact inspected the vehicle and noticed a leak coming from the brake line. The contact related the failure to NHTSA Campaign Number: 94V152000 (Service Brakes, Hydraulic). The vehicle was not diagnosed nor repaired by an independent mechanic or the dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 300,000.
Owner complaint 11510995 filed with NHTSA
BrakesFiled Apr 2020140,000 milesPA
Tl* the contact owns a 1994 Ford Crown Victoria. The contact stated that while driving approximately 40 MPH, it became difficult to steer the vehicle. The contact stated that the front suspension detached AT the ball joint. The failure caused the brake dust cover to puncture the tire. The vehicle came to an abrupt stop. The vehicle was taken to an independent mechanic to be repaired. The ball joint was replaced along with the brake dust cover. The contact stated that the failure recurred on the passenger's side of the vehicle while driving AT approximately 10 MPH. The vehicle was not taken back to be repaired. A dealer was not contacted.
The nuts and bolts that attach the rear brake adaptor to the axle housing flange CAN loosen and eventually separate. If one or more of the nuts come off the bolts, damage to the parking brake assembly or to the antilock brake system (ABS) sensor and sensor ring (if so equipped) will occur. If all four nuts on one end of the axle come off the bolts, damage to the brake hydraulic line or the parking brake cable CAN occur.
Risk and remedy
Risk
Occurrence of any of these conditions CAN result in a loss of braking capability and possible accident.
Remedy
Dealers will inspect and, if needed, install new bolts. If any of the fasteners are disconnected, the parking brake and ABS components will be inspected and serviced.