Ford · Crown Victoria

2008 Ford Crown Victoria

Large car · RWD · Gasoline or E85

Owners have filed 50 complaints about the 2008 Ford Crown Victoria with NHTSA, the 17th highest of 22 Crown Victoria years.

Most reports involve the steering: 25 complaints, or 50% of everything filed, followed by speed control (11) and suspension (6). Half of those steering reports describe a failure before 97,000 miles.

Complaints for this year mention 11 crashes, 3 fires, 6 injuries, and 1 death. These are owner reports and have not been verified by NHTSA.

NHTSA lists 3 recalls for this model year. The most recent, campaign 14V704000, was filed in November 2014 and concerns the pinion shaft.

EPA figures put it at up to 18 MPG combined (15 city, 23 highway), close to the average large car of its year.

What owners report

Full breakdown
  • Steering 50% · typically 97,000 miles · 4 crashes 25
  • Speed control 22% · typically 111,000 miles · 4 crashes 11
  • Suspension 12% · typically 62,000 miles 6
  • Electrical system 10% · typically 73,000 miles 5
  • Brakes 6% · typically 61,000 miles · 1 crash 3
  • Transmission and drivetrain 6% · typically 105,000 miles · 1 crash 3
  • Body and structure 4% · typically 28,000 miles · 1 crash 2
  • Other or unknown 4% · typically 130,000 miles 2
14V704000 Filed Nov 5, 2014 36,888 vehicles

Pinion shaft

Ford Motor Company (Ford) is recalling certain model year 2005-2011 Ford Crown Victoria, 2005-2011 Mercury Grand Marquis vehicles manufactured March 23, 2004, to August 30, 2011, and 2005-2011 Lincoln Town Car vehicles manufactured March 8, 2004, to August 30, 2011, and on which the upper intermediate shaft was serviced during the course of safety recall 13V-385. The prior repairs may not have been correctly performed.

Risk and remedy
Risk
Improper servicing of the upper intermediate shaft could cause the shaft to separate, which can then result in a loss of steering control, and increasing the risk of a crash.
Remedy
Ford will notify the owners of vehicles whose repair records reflect that the upper intermediate steering shaft was repaired during the course of the prior recall 13V-385. Dealers will inspect and replace the upper immediate shaft if necessary free of charge. The recall began November 17, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S25.
Filed by
Ford Motor Company (manufacturer number 14S25)
13V385000 Filed Aug 29, 2013 355,000 vehicles

Steering

Ford is recalling certain model year 2005-2011 Ford Crown Victoria (including Crown Victoria Police Interceptors), Mercury Grand Marquis, and Lincoln Town Car vehicles. The affected vehicles are currently registered or were originally sold in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Severe corrosion can seize the lower intermediate shaft which may cause the upper intermediate shaft to collapse and the steering column lower bearing to separate.

Risk and remedy
Risk
If the lower bearing separates, the vehicle may experience a loss of steering, increasing the risk of a crash.
Remedy
Ford will notify owners and dealers will replace the lower intermediate shaft, free of charge. The upper intermediate shaft and steering column lower bearing will be inspected to identify any damage that may have occurred as a result of lower intermediate shaft corrosion, and repaired or replaced as necessary. If the steering column lower bearing has separated, a retainer clip will be installed. The recall began on October 23, 2013. Owners may contact Ford at 1-866-436-7332. Ford's recall number is 13S08.
Filed by
Ford Motor Company (manufacturer number 13S08)
07V270000 Filed Jun 26, 2007 8,800 vehicles

Front hub

On certain passenger vehicles, a front wheel bearing and hub assembly may fracture due to improper heat treatment.

Risk and remedy
Risk
If a hub fractures, it may potentially detach from the wheel knuckle, resulting in the wheel being retained only by the brake caliper assembly. As a result, the wheel may separate from the vehicle potentially resulting in a crash.
Remedy
Dealers will inspect both front wheel bearing and hub assemblies and replace them free of charge. The recall began on june 22, 2007. Owners may contact ford AT 1-800-392-3673.
Filed by
FORD MOTOR COMPANY (manufacturer number 07S54)

Recent owner reports

Complaints as owners filed them with NHTSA, lightly tidied for readability. They are not verified.

Electrical system Filed Aug 2023 AZ

Complete instrument cluster failure, no lights illuminate except turn signals. Speed, rpm’s, fuel level, temperature, are completely off instrument cluster is completely dark when driving at night, told that the solders on the cluster are bad. (Defective?)

Owner complaint 11536418 filed with NHTSA
Steering Filed Aug 2022 141,000 miles MI

The contact owns a 2008 Ford Crown Victoria. The contact stated that while driving at an undisclosed speed, the vehicle experienced a loss of power steering assist. The contact inspected the steering column underneath the hood and noticed that the steering shaft was corroded. The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The contact related the failure to NHTSA Campaign Number: 13V385000 (Steering) however, the VIN was not included in the recall. The failure mileage was approximately 141,000.

Owner complaint 11480958 filed with NHTSA
Steering Filed Jul 2022 CA

The right front wheel hub broke at the weld when turning in a parking lot. The part is available for inspection. Had this happened at freeway speed, the right front wheel would have departed the vehicle. The safety hazards are obvious. I attempted to contact customer service and they did not reply.There was no warning sign and the part has not been inspected. I am not a welder. It appears this part had a bad weld from the start. I suspect it was welded by a machine and there may be more just like it from the same production run.

Owner complaint 11476597 filed with NHTSA
18
15city
23highway
18combined MPG
$3,700fuel a year

Most efficient of 1 EPA-tested configuration. Average for 2008 large cars: 19.3 MPG.

How 2008 compares with other Crown Victoria years

Owner complaints per model year. The highlighted column is this year.

Questions about the 2008 Ford Crown Victoria

Does the 2008 Ford Crown Victoria have any recalls?

Yes. NHTSA lists 3 recalls for the 2008 Ford Crown Victoria, most recently 14V704000 (November 2014) for the pinion shaft.

What are the most common problems with the 2008 Ford Crown Victoria?

Owner complaints to NHTSA most often involve the steering (25), speed control (11), and suspension (6).

What gas mileage does the 2008 Ford Crown Victoria get?

The EPA rates it at 15 MPG city, 23 MPG highway and 18 MPG combined for its most efficient version.