Owners have filed 563 complaints about the 1996 Ford Contour with NHTSA, the 3rd highest of 9 Contour years.
Most reports involve the engine: 124 complaints, or 22% of everything filed, followed by electrical system (119) and transmission and drivetrain (77). Half of those engine reports describe a failure before 80,000 miles.
Complaints for this year mention 35 crashes, 24 fires, and 39 injuries. These are owner reports and have not been verified by NHTSA.
NHTSA lists 8 recalls for this model year. The most recent, campaign 01V230000, was filed in July 2001 and concerns the electrical system.
EPA figures put it at up to 25 MPG combined (21 city, 31 highway) in its most efficient version, out of 4 configurations tested, close to the average compact car of its year.
On certain my 1996-1998 passenger vehicles built AT the kansas city, cuautitlan assembly plants or on my 1999 passenger vehcles built AT the automotive alliance international assembly plants, the rough surface of the heater blower resistor's stainless steel blades CAN damage the copper surface of the wiring harness connector. The damage could, over time, cause increased resistance in the connector and, due to subsequent terminal relaxation, result in an open circuit condition.
Risk and remedy
- Risk
- The open circuit could lead to electrical arcing that could melt the connector housing material creasing the potential for a fire.
- Remedy
- Dealers will install a new heater blower resistor and a new wire jumper harness. Owner notification began august 29, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ford AT 1-800-392-3673.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 01S22)
Vehicle description: 1995 passenger vehicles equipped with the 2.0l and 2.5l engines, and 1996 vehicles equipped with 2.5l engines. Tightening of the engine cooling fan motor bearings, up to and including motor stall, CAN result in increased motor torque and higher than normal motor current and accompanying high motor temperatures.
Risk and remedy
- Risk
- Overheating of the cooling fan motor due to excessive current CAN result in smoke and odors from bearing grease, insulation and other internal motor components. If electrical current continues to be applied to the motor, internal motor components could ignite possibly igniting other engine compartment components.
- Remedy
- Dealers will install a positive temperature coefficient device in-line with each fan motor. Ford will also extend the warranty on the engine cooling fan assembly to a total of 8 years of service or 100,000 miles from the warranty start date, whichever occurs first. If the vehicle already has more than 100,000 miles, this coverage will last until july 31, 2001.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S44)
Vehicle description: passenger vehicles not equipped with the anti-lock braking system (ABS). A pressure conscious reducing valve (pcrv) in the rear brakes may be subject to corrosion and result in malfunction, when operated in areas that use salt compounds on the roadway for de-icing or dust control.
Risk and remedy
- Risk
- If both pcrv's malfunction, vehicle handling could be adversely affected during braking as a result of the rear wheels locking, increasing the risk of a crash.
- Remedy
- Dealers will install improved pcrv's in the rear brake system. This recall was expanded in september 2000 to include 1999 and 2000 ford contour, mercury mystique and cougar vehicles.
- Filed by
- FORD MOTOR COMPANY (manufacturer number 00S03)