Ford · Crown Victoria

1998 Ford Crown Victoria Suspension Problems

Large car · RWD · Regular

Owners of the 1998 Ford Crown Victoria have reported 18 suspension problems to NHTSA, 15% of all complaints about this model year.

Where owners named a specific part, the most common were front (8) and rear (7).

The typical report came at around 93,000 miles, and complaints were filed between November 1998 and August 2019.

These suspension complaints include 1 fire.

For comparison, the 1996 Crown Victoria has the most suspension complaints of any year, with 51.

Springs, struts, shocks, control arms, ball joints, bushings and stabilizer links, front and rear.

1 recall for this model year involves the suspension. If your problem matches, a dealer repairs it free under the recall.
Complaints18
Typical mileage93k
Crashes / fires0 / 1
Injuries0

Parts named in these complaints

  • Front8
  • Rear7

Owners choose these labels when they file, so they are a guide rather than a diagnosis.

What owners say

Suspension Filed Aug 2019 180,000 miles FL Fire

Had my car since 2014 I worked hard to buy it. It drove pretty decide untill electric problems started to occur. Then my passanger side wheel folded in while operating with my kids life or death situation im just a hard working father trying to provide a safe transportation for my family

Owner complaint 11252146 filed with NHTSA
Suspension Filed Feb 2015 84,000 miles TX

I was a professional mechanic and went to school for it also with over ten years experience in the field ! This is the story I decided to replace upper and lower ball joints and outer tie rod ends with upper control arm bushings and wheel bearing hub assembly's all AT the same time to avoid a vehicle breakdown like what just happened ! The car had about 54000 miles on it when I did this with me knowing these parts were about to go out due to wear before 75000 miles AT the latest from experience on average ! But this is the complaint and concern !

Owner complaint 10683532 filed with NHTSA

Related recalls

98V322000 Filed Dec 16, 1998 175,000 vehicles

Lower ball joint

Vehicle description: certain 1996-1999 ford crown victoria police, fleet, natural gas, and 1996-1999 lincoln town car limousine vehicles that were produced with a lower control arm ball joint containing a one piece bearing; and 1990-1996 ford crown victoria police, fleet, and ngv vehicles and 1990-1996 lincoln town car limousine vehicles that have been serviced with either a ball joint containing the one-piece bearing or a front lower control arm containing a ball joint with a one-piece bearing. The one-piece bearing within the lower control arm ball joint CAN weaken slowly during use and eventually crack. This could result in separation of the ball and cap of the joint, allowing the control arm to drop to the ground.

Risk and remedy
Risk
If this occurs while the vehicle is moving, reduced steering control could occur, increasing the risk of a crash.
Remedy
Dealers will replace the lower control arm ball joints (2).
Filed by
FORD MOTOR COMPANY (manufacturer number 98S37)

Suspension complaints across Crown Victoria years

Questions about suspension problems

How common are suspension problems on the 1998 Ford Crown Victoria?

18 owners have reported suspension problems to NHTSA, 15% of all complaints for this model year.

Is there a recall for suspension problems on the 1998 Ford Crown Victoria?

Yes. 1 recall for this model year concerns the suspension: 98V322000.